APEC Water Systems WFS-1000 Instruction Manual Page 1

3-STAGE WATER FILTRATION SYSTEMINSTALLATION INSTRUCTION& OWNER’S MANUALVer 1.2All Rights Reserved © APEC Water Systems

73. Recommend Connection For Flex Line Riser: See Fig. 6A. Loosen nut and separate cold water riser tube from shut off valve. Gently bend riser tu

8Test for leaks at this point: Close the Needle Valve (turn needle handle clockwise all the way in to close). Turn ON the cold water supply to the sin

9Step 2: Drill A Hole For The Faucet Drill 1/2” diameter hole for standard faucet. (Air-Gap faucet: drill 1&1/4” hole.)For best results use a

10Step 3: Mounting The Faucet1. Mount the faucet as shown in Fig.7. Step 4: Positioning The System1. Main System: The main system can stand in th

11Step 5: Connecting The System Summary of Tubing Connections: There are 2 connections: See Fig 8 Point A to X: Connect system to COLD water s

122. Point X Feed water connection:Tubing color: Red tubing. Connect the RED tubing to the Feed Water Needle Valve.Fitting type: Metal compress

13Ball Valve(Recommended)Tee tting for icemakerSourceWaterRefrigeratorFig. 9Option: Ice-maker ConnectionIf you want to connect product water from th

14Fig. 10FILTER CHANGE INSTRUCTIONSHow To Replace Stages 1, 2, 3 Filters:1) Turn OFF cold water supply to system. Lift up faucet lever briefly to re

15LIMITED PRODUCT WARRANTYScopeAPEC takes pride in selling a superb line of products, including this water filtration system (“Product”). As such, AP

16CONDITIONS THAT RENDER THIS LIMITED PRODUCT WARRANTY VOIDTHIS LIMITED PRODUCT WARRANTY SHALL BE VOID IF:1. The Product is not operated in compliance

17Advanced Purification Engineering Corp.1320 S Johnson DriveCity of Industry, CA 91745For questions or comments please visit our website at:FreeDrink

Please keep this Owner’s Manual for future reference. It contains useful information on how to maintain and care for your APEC quick flow water filter

1Thank you for choosing APEC drinking water systems. You now own the finest water filter in America. Please read and become familiar with instructions

2Components included with the system:Make sure you have all these parts before starting installation.3 filters in 3 HousingsInstallation kit includes:

32. Metal compression nut fitting: (comes with 1 insert, 1 sleeve, 1 nut) Only feed water adapter-

43rdStage2ndStage1stStageUseWrench3rdStage2ndStage1stStageTHERE ARE TWO PARTS TO INSTALLING THE SYSTEM: Part I. Assemble the filters and housings ont

5PART II. INSTALLING THE SYSTEMSpace: Make sure there is sufficient space under the counter for installation (an area of about 15”L x 6”W x 12”H for

6Fig. 5A - Needle Valve Installation.Attach the needle valve (C) to water supply adapter (A). Please apply 5-6 wraps of teflon tape to needle valve pr